Full Throttle Custom Cycles Phoenix AZ - Customizing Your Bagger
BODY PARTS
 
 
Cutting Edge Tank Kit
John's new cutting edge tank kit allows you to stretch a tank and hand it to the paint shop in one hour! These parts are injection molded NYB Polimer, super high strength. Easy to paint or body work. Comes with dash, tank shell & chrome popup cap. This design lets you stretch your tank with out damaging your stock harley tank. Make sure to order our new seat pan which is custom molded to fit this tank. To install prep surface use pannel bond, fit dash and your done! No need to remove internals from tank! Its dent and crack resistant!!! Fits 2008 to present!
Price: $695.99
Enter Option Name:
Cutting Edge Tank Kit 01 to 07
new cutting edge tank kit allows you to stretch a tank and hand it to the paint shop in one hour! These parts are injection molded NYB Polimer, super high strength. Easy to paint or body work. Comes with dash, tank shell & chrome popup cap. This design lets you stretch your tank with out damaging your stock harley tank. Make sure to order our new seat pan which is custom molded to fit this tank. To install prep surface use pannel bond, fit dash and your done! No need to remove internals from tank! Its dent and crack resistant!!!
Price: $659.99
Enter Option Name:
Dash Kit for 1995-2007
Here it is the dash of all dashes...The Big Baller Dash and the Accent Dash! It has a billet pop up cap, Tank saver stays on dash and the cap pops out of the center. It has John’s accent design that makes it the perfect peace to complete your stock or stretched tank! As the dash tapers down it slims down to a low 2 & 1/2 inches wide. Fits all 1995-2007 street glide, FLHT, and electric glides. . Comes with mounting tab, rubber trim, and land mark cap.
Price: $390.00
Enter Option Name:
3D Stealth Dash Kit for 2008 & Present
Sleek dash kit for your 2008-2011 Harley John's new NYB Polymer, injection molded 3D Dash fits perfect. Simply trim the end for desired length, bond strap th the bottom and paint. It comes with billett chrome pop-up cap, trim pieces and strap. Fits factory 2008 to present Road Glide, Street Glide and Electraglides.
Price: $390.00
NYB Polymer Pop On Side Filler Panels
Finally Injection Molded Flared Side Filler Covers that pop on! No more bonding them over the stock Harley Covers! Available for 1999-Present BE SURE TO SELECT YOUR BIKE YEAR BELOW Made of N.Y.B. Polymer. Super strong! Easy to paint! Has John's new design! No more fiberglass or flimsy vaccum formed ABS and messing with glue! Will fit with stock & stretched saddlebags. For stock they will need to be slightly trimmed! ***SIDE FILLER PANELS ARE SOLD AS A SET*** ***NOTE: WE LEFT EXTRA MATERIAL WHERE THE SIDECOVERS MEET THE BAGS. THEY NEED TO BE TRIMMED TO DESIRED GAP.***
Price: $415.00
Enter Option Name:
Smoothy Rear Fender For 1993-2008
Bolts over your stock fender. Accepts our license plate bracket. Super strong! Ready for Paint. Fits 93-08 touring models (road glide, road king, street glides, FLHT). Comes with mounting plates and directions for easy installation. Even though this fender covers your stock fender it doesn’t sit up high. This is the lowest fender you will find for your motorcycle. It hugs your stock fender as close as it can!
Price: $520.00
Accent Rear Fender For 1998-2008
Mounts over old fender. Fits our license plate bracket. Super strong! Ready for Paint. Bolts over Stock Fender. Fits 93 thru 2008 touring models (road glide, road king, street glides, FLHT). Comes with mounting plates, easy installation, and fits over stock fender.
Price: $520.00
SMOOTHY REAR FENDER FOR 2009-Present W/or W/out Cutouts!
A direct replacement fender for your 09-Present. Super strong and ready for paint! Accepts our license plate bracket. Fits 09-Present touring models (road glide, road king, street glides, FLHT).
Price: $520.00
Enter Option Name:
BAD ASS ACCENT SPOILER 1999 - Present
Johns New Chin Spoiler lets you cover up the lower frame area and allows you to add some much needed paint to the lower part of your ride. This part is made of injection moulded NYB polymer. It is super easy to paint. Fits 1999-Present. Comes with mounting bracket and hardware. Note: Does not fit with Harley Oil Cooler Note: Only works with raked bikes.
Price: $290.00
Curved LED License Plate Frame
his super bright LED license plate frame is designed to fit our rear fenders. Available in Chrome or Black finish. **NOTE: This License Plate Frame Fits Only Our Fender and Klockwerks Fender**
Price: $192.00
Enter Option Name:
Stream Line Raked Fairing
**This part needs to be mocked up and fitted before paint.**
Price: $800.00
RAKED CORRUPT FAIRING
If you raked your neck this is the fairing for you! It is a direct replacement for all streetglides, electric glides & FLHTs. It is made of hand laid fiberglass and then gel coated. The headlight area is stretched with nasty looking hot rod vents for a bad ass look! **This part need to be mocked up and fitted before paint.**
Price: $800.00
Sinister Big Baller 3D Paint-able Windshield
For all you Ballers out there John's 3D design gives you many paint options with a super fly design. It has a slight flipped up design that helps keep the wind out of your face. It is made of high strength ABS injection mold. Fits 93 and newer street glide, FLHT, or electric glide. This trick windshield eliminates the gap between the faring and the old windshield. Allows you to paint the color of your bike and add some style to your ride. It measures 4 & 1/4" at the very tip and then tapers down to 3 & 1/4".
Price: $156.00
Hotrod 3D Paint-able windshield
John's badass 3d hotrod windshield will give your bagger the edgy hotrod look you've been searching for! It is paint-able and the 3D design gives you many different paint options. It is made out of high strength ABS plastic. It fits all street glides electric glide fairings. It measures 4 & 1/4" tall and then gradually slopes down to 3 & 1/4". When bolted in it fits flush with the outer fairing giving it a one piece look.
Price: $156.00
Wicked Road Glide Windshield
Finally a windshield for your Road Glide! With our Wicked Road Glide windshield you will immediately change the look of your bike! Easy bolt on design updates your bike in minutes! It is made of NYB Polymer which is stronger than ABS! On the windshield all bolt holes will be hidden from view! Order yours now! **NO MORE OUTER BOLTS SHOWING ON YOUR WINDSHIELD!**
Price: $230.00
Dirty Bastard Road Glide Windshield
Here it is John's New Dirty Bastard Paintable Road Glide Windshield! It has a taller aero dynamic shape which helps to deflect the wind! It is made of NYB polymer and is paintable.Johns hidden mounting studs gives the clean look!The 3D design adds a bad ass look to your bad ass bagger! It is very easy to install!
Price: $255.00
Thick Sick Wrap Fender 26"
26" WRAP FENDER. 12 GUAGE STEEL HAND SPUN! HUGS THE TIRE. FOLLOWS THE RIM. THE FORARD ACCENTS ADD A BAD ASS LOOK OR YOU CAN TRIM THEM OFF FOR A MORE SUBDUED LOOK!
Price: $395.00
26" INCH FRONT FENDER
26" fender. Hand laid fiber glass that has been gel coated. It is super straight and rigid. You can trim to your specifications. Also if you want a smooth fender you can easily sand off the accent!
Price: $470.00
Front Fender for 21, 23
The 21" fender comes smooth. The 23" fender will fit 24" and comes with an accent on the front of the fender. If you don't like the accent it can easily be sanded off. Super strong hand laid fiberglass and ready for paint.
Price: $425.00
Enter Option Name:
Slim Line Fender Mounting Blocks
Here's our new SLIM LINE Mounting blocks for our WRAP fenders. They are available in Black and Chrome. These are 1" spacers. They will work with Harley, Hawg Haulters, and Bike Builders fork Legs! They are sold as a SET!
Price: $90.00
Enter Option Name:
Fender Mounting Blocks
Mounts to lower legs and the universal design allow you to mount our fender in any height or position. They are designed to work with our smoothy fenders. They also work great with all FL Fenders. They are 3/4" spacers.
Price: $105.00
Enter Option Name:
Big Baller Gauge Housing for Road Glides
Big Baller gauge housing recessed speedo & tack housing reduces reflection from gauges. Allows you to see the gauges more clearly along with the bad ass custom look. Made of high strength NYB Polymer which is stronger than ABS. Fits 04-present. Will fit earlier roadglides if you update your gauges.
Price: $190.00
Dirty Money Headlight Bezel 97-Present
Dirty Money Headlight bezel will update your roadglide in seconds! Since our Dirty Money Bagger was such a hit we decided to take a mold of off a few of the parts we made for it! Our Dirty Money headlight bezel gives your road glide a nasty aggressive look. IT FITS 1997-Present. It is made of NYB polymer..which is stronger than ABS!
Price: $165.00
Sinister Pissed off Headlight Bezel
Our headlight bezel gives your road glide a nasty aggressive look. It fits 09 to present models. There will be a slight trimming needed for the 2012 models. It will fit earlier years but you need to upgrade your headlight assembly first to 09 or newer. Made of NYB polymer..which is stronger than ABS! Note some of the ealier 09 models came with the 08 headlight assembly. These bezels are designed for the later 09 to present assemblies.
Price: $165.00
Big Baller Horn Cover
This is Johns latest creation! Get rid of the ugly cowbell horn cover! Our new design is made of NYB polymer which is stronger than ABS!!!
Price: $159.00
Raked Accent Nacelle
You've raked your Road King now it's time to get your nacelle pointing in the correct direction! You can do this easily with John's re-designed raked nacelle! Adds a sick look to your raked road king! It’s paintable!
Price: $395.00
Accent Glove Box Doors for Road Glides
Johns accent glove box doors goes with all our accent parts line. Gives your glide that extra edge. Fits all road glides. Made of NYB Polymer. Sold as a set!
Price: $210.00
Drop Top Glove Box Doors for Road Glides
John's drop top glove box doors fit all road glides! Made of NYB Polymer. Gives the bike a sick custom look. Lid Design locks doors in place to prevent scratching when opening and cleaning. Sold as a Set!
Price: $210.00
Up-Yours Performance Exhaust
Check out our latest creation! UP-Yours Performance exhaust. Has a high performance baffle for back pressure. This is the baddest sounding pipe on the market!!!!! Makes 76.59 HP and 88.23 Torque with stage 1 air cleaner on 2007s-2010 touring models. Fits all 1998 to present touring models. Exhast has 02 plugs stick locations for 09 & 10 to present. Exhast pipe comes ceramic black with chrome heat shields and a chrome tip. This pipe makes great numbers on the dyno. This was designed for performance as well as looks.
Price: $1,295.00
CHIN SPOILER
This is our new Full Length Chin Spoiler. Bolts on to down tubes and will clear the oil cooler on the new HD 103 engine packages. Hand laid fiberglass composite finished in white Gel Coat. Wire mesh screen is included as shown Only works with raked bikes.
Price: $375.00
Enter Option Name:
Big Mouth Chin Spoiler
"Big Mouth Chin Spoiler" New design for 2000-2012 Model Harley Touring Bikes White Gelcoat Finish Steel Mounting Brackets Aluminium Grill Mounted Please specify year model when ordering.Only works with raked bikes.
Price: $375.00
Enter Option Name:
CHIN SPOILER 2-HOLES
2-HOLES WITHOUT OIL COOLER Only works with raked bikes.
Price: $340.00
Enter Option Name:
CHIN SPOILER 3-HOLES
3-HOLES WITH OIL COOLER Only works with raked bikes.
Price: $340.00
Enter Option Name:
Dirty Road Glide 6 x 9 Inner Fairing
Fits all Road Glides. It comes with 6 X 9 speaker grills and gauge bezels in either chrome or black. It accepts the factory radio and bezels. This part is made of high strength paintable NYB polymer. The holes for the gauges are not pre-drilled. This allows you to use 2 or 4 guages depending on your needs. Use factory Harley edge trim (not included)
Price: $1,045.00
Select Bezel Color:
Select Gauges:
Dirty Road King/Road Glide Builders Inner Fairing
The New Dirty Builders Road Glide Road King Inner Fairing allows you to turn your Road King into a Road Glide, or customize your Road Glide. Use factory Harley edge trim (not included). If you are converting your Road King into a Road Glide you will need this part along with these parts: 1. SI-126 - Roadglide Radio Holder 2. SI-127- Radio Conversion Kit 3. SI-128 - Dirty Money Stretched Outer Fairing 4. SI-131 - Dirty Money Cover and Cap 5. SI-121 - Cats Ass Fairing Bracket / Raked Bike (Use a Stock Bracket For a Non Raked Bike)
Price: $895.00
Dirty Money Stretched Outer Fairing
The Dirty Money Stretched Outer Fairing fits all Road Glides. It is made of high strength, paintable, NYB polymer. It accepts factory windshields, headlights and headlight covers. If you are converting your Road King into a Road Glide you will need this part along with these parts: 1. SI-126 - Roadglide Radio Holder 2. SI-127- Radio Conversion Kit 3. SI-130 - Dirty RK/RG Builders Inner Fairing 4. SI-131 - Dirty Money Cover and Cap 5. SI-121 - Cats Ass Fairing Bracket / Raked Bike (Use a Stock Bracket For a Non Raked Bike)
Price: $800.00
Cats Ass Fairing Bracket
This bracket is stretched 1 inch and raked 3 degrees in order to clear the fork cans on all raked bikes. If your Road King is not raked use a stock bracket.
Price: $275.00
Road Glide Radio Holder
Road Glide Radio Holder - Replace the factory radio bracket. This part fits all Road Glides. If you are converting your Road King into a Road Glide you will need this part along with these parts:
Price: $150.00
Radio Conversion Kit
The Radio Conversion Kit allows you to use aftermarket units. It fits all 1990 to present and can be used on all baggers. This part comes in black. You will need this part if you are converting your Road King to a Road Glide along with these parts:
Price: $150.00
Dirty Money Cover and Cap
The New Dirty Money Cover and Cap allow you to get rid of the factory HD gauges. This part is needed to turn your Road King into a Road Glide. Fits all Road Gildes or Road Kings
Price: $330.00
CLICK PITCHER'S TO EN LARGE. 
 
 
 
Website Builder provided by Vistaprint